Medrad Mark 7 Arterion, Operation Manual

Page: 114 / 162

MEDRAD
®
Mark 7 Arterion Injection System
16 - 106
Figure 16 - 29: Syringe Heat Maintainer
Figure 16 - 30: Syringe Heat Maintainer Connected
16.6.2 Syringe Pressure Jacket Installation
Install the Pressure Jacket on to the front of the injector prior to installing a syringe.
1.
Align the slot in the pressure jacket with the protrusion on the front of the injector.
2.
Push firmly on the face of the pressure jacket until it snaps on to the injector.
3.
Ensure that the syringe interface can close properly.
16.6.3 Hand Switch and Foot Switch Installation
Figure 16 - 31: Hand Switch and Foot Switch Power Unit Location