Medrad Mark 7 Arterion, Operation Manual

Page: 77 / 162

Arming and Injecting
11 - 69
11.4 Completing an Injection
The injection system stops an injection when the programmed volume is delivered, or an operator
terminates the injection. In the
Sentinel window, an Injection Complete message displays for a
completed injection, and a Premature Termination message displays for an operator terminated
injection. The system emits an audible beep when the injection is complete.
NOTE:
If finished with a Case, proceed to "Chapter 12 - Tear Down" .
NOTE:
To continue with a case, proceed to "11.5-Refilling Syringe During a Procedure" to
refill a syringe, or return to "11.2-Arming the Injector" to rearm.
NOTE:
If End Case pressed inadvertently, press No on the popup that appears to return to
the current Case.
NOTE:
To continue with a case after inadvertently pressing End Case and then pressing
Yes on the popup, disconnect the patient, rotate the Head in the Purge position
(upward), and purge the system of all air. Rearm the system.
XMC 928A
1 knob operation Independent Actions - See
Tables 10-1 and 10-2
XMC 928A
2 knob operation
Injection and X-ray
XMC 945 40 No Action
XMC947R
1 knob operation Independent Actions - See
Tables 10-1 and 10-2
XMC 947R
2 knob operation
Injection and X-ray
Table 11 - 3: Injection System and Imaging System Initiate Protocol
OEM Bayer Catalog Number Action