Medrad Mark 7 Arterion, Operation Manual

Page: 128 / 162

MEDRAD
®
Mark 7 Arterion Injection System
16 - 120
9.
Insert and fasten one 1/4-20 x 1-1/4 screw (E) on the DCU Mounting Bracket into the hole
closest to the DCU Support Post.
10.
Rotate DCU Support Bracket so that the bracket is positioned directly under the Pedestal
Arm.
11.
Insert two 1/4-20 x 1-1/4 screws (E) into holes at ends of the DCU Mounting Bracket.
12.
Position the Hand Switch and cable management (I) in between the DCU Support Post and
stand as shown below
13.
Insert the 1/4-20 x 1 button head cap screw (G) and tighten.
14.
Insert the remaining 1/4-20 x 1-1/4 screws (E) into the remaining holes on the DCU Mounting
Bracket.
15.
Securely tighten all of the 1/4-20 x 1-1/4 screws on the DCU Mounting Bracket.
H
I