Medrad Mark 7 Arterion, Operation Manual

Page: 70 / 162

MEDRAD
®
Mark 7 Arterion Injection System
11 - 62
Before an operator performs the arming process, the Sentinel window displays messages to indicate
any remaining tasks that need to be performed to complete the arming process:
• a syringe is present.
• the Injector Head is in the Inject (downward) position.
• the drop front is closed.
• a purge has been completed.
The system removes the messages as each task is performed.
Operators can change the protocol parameters from the Home tab or Protocols tab when in the armed
state.
11.2.1 Arm Single Mode
NOTE:
The term start switch is used in this section to refer to the hand switch, foot switch
or hand controller.
The Arm Single mode is used in Single (mL/s and mL/m) protocols and Phased protocols. This mode
allows for one injection.
Single and Phased mL/s Injection: The injection starts when the operator presses and holds the start
switch.
Single mL/m Injection: The injection starts when the operator presses the start switch.
1.
Select the Home tab.
2.
Single mL/s protocols : select Arm Single (A) .
Figure 11 - 1: Single Arm