Medrad Mark 7 Arterion, Operation Manual

Page: 37 / 162

6 - 29
6 Using and Understanding the Display Control Unit Screen
The Display Control Unit touch screen has five tabs from which an operator can manage protocols, arm
and disarm the injector, review injection history, set options, and view help topics.
NOTE:
An operator will be locked-out from a Display Control Unit if another operator is
performing functions on the Injector Head or another Display Control Unit
connected to the same system.
The chapter discusses:
• "Home Tab"
• "Protocols Tab"
• "History Tab"
• "Options Tab"
• "Help Tab"
• "Display Control Unit Lock-outs"
• "Performing Touch Screen Calibration"
6.1 Home Tab
Operators can set protocols, select the Single or Phased protocol, or arm the injector on the Home tab.
This tab has a Programmed window (A), Actuals window (B), and Sentinel window (C). Each of these
windows is discussed below.
Figure 6 - 1: Home Tab
6.1.1 Programmed Window
The Programmed window displays the protocol parameters for an injection including Flow Rate,
Volume, Pressure, Rise time (Rise Time is not listed for Variable Flow Rate or mL/m protocols), and
Delay (Delay is not listed for phased and Variable Flow Rate or mL/m protocols).
Operators can set Single mL/s and mL/m, Phased, and Variable Flow Rate protocols from the
Programmed window. For more information, see "9.1 - Set Injection Parameters from the Home Tab" .