Medrad Mark 7 Arterion, Operation Manual

Page: 123 / 162

Installation - System and Accessory
16 - 115
Figure 16 - 47: Cable Strain Relief Removal
6.
Insert the cables connectors in the corresponding sized holes in the plate.
Figure 16 - 48: Removing Cable Plate
NOTE:
If attaching the DCU cable, remove the cover plate (C) from the plate.
7.
Attach the Panel Mount Plate to the bracket using the four 4-40 flat head, thread cutting
screws.
Figure 16 - 49: Mount Plate to Bracket
8.
Apply RTV to the underside of the mounting bracket.
9.
Mount the bracket to the floor. hardware is included to mount the bracket to either concrete
or to wooden floors.