Medrad Mark 7 Arterion, Operation Manual

Page: 100 / 162

MEDRAD
®
Mark 7 Arterion Injection System
16 - 92
16.2 Pedestal Mount Installation
The Mark 7 Arterion pedestal mount configuration ships in two boxes as noted in “Unpacking the
Injection System.” The installer needs to complete the pedestal assembly, attach the Injector Head and
Display Control Unit, route cables, and make the connections to the Power Unit.
1.
Remove the pedestal from the box.
Figure 16 - 1: Pedestal
2.
Insert the male end of the articulating arm into top of the upper mast (A).
• Tighten the thumb screw.
3.
Attach the Injector Head to the articulating arm.
a.
Loosen the Injector Head Knob (B) by turning counterclockwise until it spins freely.
Figure 16 - 2: Loosen the Injector Head Knob
b.
Insert the Injector Head mounting pin into the top of the Articulating Arm.
Air Embolism Hazard - Serious patient injury or death may result.
• Injector head shall be mounted on Articulating Arm.
Mechanical Hazard - Minor or moderate patient and/ or worker injury may result.
• Move Articulating Arm to upper position prior to removing head.
• Do not mount DCU to Articulating Arm.
CAUTION