Medrad Mark 7 Arterion, Operation Manual

Page: 47 / 162

8 - 39
8 Power Up and Shutdown the Injector
This chapter describes:
• "Powering up the System"
• "Shutdown"
8.1 Powering up the System
1.
Press the Power Switch on the Power Unit.
2.
Open the power switch cover on the Display Control Unit, and press the Power Switch . A
splash screen and then a safety screen displays.
3.
Close the power switch cover.
4.
Read the warnings and press Continue . The Home tab displays.
8.2 Shutdown
1.
Open the power switch cover on the Display Control Unit, and press the Power Switch .
2.
Close the power switch cover.
3.
Press the Power Switch on the Power Unit.
8.3 Emergency Shutdown
In the event of an emergency such as a fire, explosion, or electrical shock, press the Power Switch at
either the Display Control Unit or Power Unit, or disconnect the power cord from the wall outlet to shut
down the system.
Electric Shock Hazard - Minor or moderate patient and/ or worker injury may result.
• Verify that the voltage and frequency marked on the serial tag on the Power Unit matches
the voltage and frequency of the electrical outlet.
• Do not use extension cord or power adaptor with the system.
CAUTION
Mechanical Hazard - Minor or moderate patient and/ or worker injury may result.
• Turn off system power and disconnect patient when system malfunction occurs.
CAUTION