Medrad Mark 7 Arterion, Operation Manual

Page: 125 / 162

Installation - System and Accessory
16 - 117
5.
Lock the casters on the pedestal.
6.
Position Power Unit on the stand as shown below.
7.
Loosely attach the Crescent Clamp (D) to the bottom half of the Tube Clamp using two 10-32
x 3/4 socket head screws (E) and 3/16 hex key.
8.
Loosely attach the Crescent Clamp (D) to the top of the Tube Clamp using two 10-32 x 3/4
socket head screws (E) and 3/16 hex key. The Power Unit should be resting on the lowest
point of the stand.
9.
Align the Power Unit as shown below and securely tighten the clamps.