Medrad Mark 7 Arterion, Operation Manual

Page: 44 / 162

MEDRAD
®
Mark 7 Arterion Injection System
7 - 36
7.5 Injector Head Displays
The Injector Head has two display areas. One area shows the programmed parameters for flow rate,
volume, and pressure limit. The other area shows the volume remaining in the syringe.
Figure 7 - 4: Injector Head Display
7.5.1 Flow Rate (A)
The flow rate displays the programmed rate. For Phased protocols, the Injector Head displays the
values of the current phase. The flow rate displays in per second or per minute mode based on the
protocol parameters. Operators can change the flow rate mode using the
Options tab. See "6.4 -
Options Tab" for more information.
7.5.2 Volume (B)
The volume displays the programmed volume in milliliters. For Phased protocols, the Injector Head
displays the values of the current phase.
7.5.3 Pressure Limit (C)
The pressure limit indicates the maximum pressure that the system can use to inject contrast for the
programmed protocol. The limit displays in either psi or kPa. To understand more about pressure
limiting, see
"5.2 - Pressure Limiting" or the Display Control Unit Help Tab.
7.5.4 Volume Remaining (D)
The volume remaining indicates the amount of contrast currently in the syringe.
A Flow Rate B Volume
C Pressure Limit D Volume Remaining
E Volume Remaining Icon F Enable Button
G Enable Indicator H Fill Strip
I Auto-Fill Button
E
C A B D
H
F
G
I