McDATA Enterprise Operating System, User Manual

Page: 212 / 328

2
2-168
Enterprise Operating System Command Line Interface User Manual
show
Parameters This command has one parameter.
Command Example
Root> show port nodes portNumber
Output The port nodes data is displayed as a table that includes the following
properties.
portNumber Specifies the port number. Valid values are:
0–11 for the Sphereon 4300
0–15 for the Sphereon 3016
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032
0–31 for the ED-5000
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140
FC Addr The Fibre Channel address of nodes attached to
this port. Private devices are assigned address
strings of 0000 followed by the two-digit
hexadecimal Arbitrated Loop Physical Address
(ALPA), instead of the 6 digit hexadecimal
number presented for public devices.
BB Crdt Represents the maximum number of
outstanding frames which can be transmitted
without causing a buffer over-run condition at
the receiver.
RxFldSz Buffer-to-buffer Receive Data Field Size from
the FLOGI received from the attached N_Port.
COS Class of service: 1; 2; 3; 4; 5; 6; F; 1,2; 2,3…
Port Name The port worldwide name of the attached
device.
Node Name The node worldwide name of the attached
device.