McDATA Enterprise Operating System, User Manual

Page: 238 / 328

2
2-194
Enterprise Operating System Command Line Interface User Manual
show
Output Example The output from the show.thresholdAlerts.log command displays as
follows:
Date/Time Name Port Type Value Int
---------------- ------------- ----- ----------------- ----- ---
05/26/02 10:58A CTA Alert #4 2 Cls3 DiscardFrms 250 10
05/24/02 12:01A CTA Alert #4 2 Cls3 DiscardFrms 250 10
05/22/02 10:58A My test CTA 43 CRC Errors 35 30
05/20/02 08:01P TTA Test #3 2 Tx Util 85 120
03/01/02 02:58A CTA Alert #1 130 CRC Errors 100 60
show.zoning
Syntax
zoning
Purpose
This command shows the zoning configuration saved on the fabric.
Parameters This command has no parameters.
Command Example
Root> show zoning
Output
The zoning configuration data is displayed as a table that includes
the following properties.
Output Example The output from the show.zoning command displays as follows.
Value The increment or utilization value of the alert.
Interval The time interval of the alert.
Active ZoneSet The enabled status, name, and member zones of
the zone set.