McDATA Enterprise Operating System, User Manual

Page: 274 / 328

A
A-34
Enterprise Operating System Command Line Interface User Manual
Message Error 219: Invalid Port Type
Description
The port type configured is invalid.
Action A port may be configured to be an eport, gport, or fport. Be sure the
port is configured appropriately and re-submit the command. On the
Sphereon 4300 and Sphereon 4500 only, fxport and gxport types are
also supported. On the Sphereon 4300, the Fabric Capable feature
must be installed to configure a E_Port, G_Port, or Gx_Port.
Message Error 220: Cannot run diagnostics while a device is logged in to the
port
Description Diagnostics cannot be run while a device is logged into the port.
Action Block the port to run diagnostics.
Message Error 221: Cannot run diagnostics on an active E Port
Description Diagnostics cannot be run on an active E Port.
Action Block the port to run diagnostics.
Message Error 222: Invalid SNMP Community Index
Description The value entered for the SNMP community index is invalid.
Action The SNMP community index must be an integer in the range 1–6.
Make the appropriate changes and re-submit the command.
Message Error 223: Unknown Error
Description The switch did not accept the request.
Action
Contact your service representative.