McDATA Enterprise Operating System, User Manual

Page: 74 / 328

2
2-30
Enterprise Operating System Command Line Interface User Manual
config
ATTENTION! Port speed changes temporarily disrupt port data transfers.
Parameters This command has two required parameters.
Command Examples
Root> config port speed 4 2g
Root> config port speed 6 negotiate
config.port.swapPortByAddr
Syntax
swapPortByAddr portAddr1 portAddr2
Purpose This command will swap two ports given the port addresses. The
ports must be offline to perform this operation.
Parameters This command has two required parameters:
Command Example
Root> config port swapPortByAddr 1e 1f
config.port.swapPortByNum
Syntax
swapPortByNum portNum1 portNum2
portNumber Specifies the port number. Valid values are:
0–11 for the Sphereon 4300
0–15 for the Sphereon 3016
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140
portSpeed Specifies the speed of the port. Valid values are
1g , 2g , and negotiate .
portAddr1 Port address, in hexidecimal format, of
the desired port to be swapped
portAddr2 Port address, in hexidecimal format, of
the desired port to be swapped