McDATA Enterprise Operating System, User Manual

Page: 63 / 328

2
CLI Commands
2-19
config
Parameters This command has one parameter.
Command Example
Root> config ficonms setMIHPTO 180
config.ficonMS.setState
Syntax
setState ficonMSState
Purpose
This command sets the enabled state of the FICON Management
Server. The FICON Management Server feature key must be installed
in order to enable the FICON Management Server State. (The
Sphereon 4300 and Sphereon 4500 switches do not accept this
command.)
NOTE: This command is displayed on a
Sphereon 3016
only if the feature
key is installed.
NOTE:
If the FICON Management Server is enabled, the default
management style is the FICON Management Style. The Open Systems
Management Style cannot be used.
Parameters This command has one parameter.
Command Example
Root> config ficonMS setState 1
NOTE: The command config.features.ficonMS on page 2-6 has functionality
that is identical to this command.
timeout Valid values are 15, 30, 45,
60, 120, 180, 240, 300, 360,
420, 480, 540, and 600.
ficonMSState Specifies whether the FICON Management
Server is enabled. Valid values are
enable and
disable . Boolean 1 and 0 may be substituted as
values.