McDATA Enterprise Operating System, User Manual

Page: 112 / 328

2
2-68
Enterprise Operating System Command Line Interface User Manual
config
Output This command displays the following switch binding configuration
data:
Output Example
The output from the config.security.switchBinding.show command
displays as follows.
Switch Binding State: Enabled and Restricting E Ports
00:11:22:33:44:55:66:77
88:99:AA:BB:CC:DD:EE:FF
11:55:35:45:24:78:98:FA
config.snmp.addCommunity
Syntax
addCommunity commIndex commName writeAuthorization
trapRecipient udpPortNum
Purpose This command adds an SNMP community to the SNMP
configuration.
switchBindingState The state of switch binding, which can have
the following values: Disabled, Enabled and
Restricting F_Ports, Enabled and Restricting
E_Ports, or Enabled and Restricting All
Ports.
Switch Binding
Membership List The WWNs of members of the SBML saved
on the switch.