McDATA Enterprise Operating System, User Manual

Page: 139 / 328

2
CLI Commands
2-95
maint
maint
The maint branch of the CLI command tree contains commands that
relate to maintenance activities.
The commands in the maint branch can be used only by the
administrator.
Note that the maint.system.resetConfig command resets all
configuration data and non-volatile settings, including network
information, to their default values (factory settings). Management
access may be lost until the network information is restored.
maint.port.beacon
Syntax
beacon portNumber beaconState
Purpose This command enables or disables port beaconing for a port.
Parameters This command has two required parameters.
Command Examples
Root> maint port beacon 4 false
Root> maint port beacon 4 0
portNumber Specifies the port number. Valid values are:
0–11 for the Sphereon 4300
0–15 for the Sphereon 3016 and 3216
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140
beaconState Specifies whether beaconing is enabled. Valid
values are
true and false . Boolean 1 and 0 may be
substituted as values.