McDATA Enterprise Operating System, User Manual

Page: 196 / 328

2
2-152
Enterprise Operating System Command Line Interface User Manual
show
show.ficonCUPZoning
Syntax
ficonCUPZoning
Purpose This command displays the contents of the host control list and the
enabled state of FICON CUP Zoning.
NOTE: The command config.ficonCUPZoning.show on page 2-18 has
functionality that is the same as this command.
Parameters This command has no parameters.
Command Example
show ficonCUPzoning
Output The data is presented as a table with the following properties:
Output Example
FICON CUP Zoning State: Enabled
Host Control List
-----------------------
01:02:03:04:05:06:07:08
09:0A:0B:0C:0D:0E:0F:00
show.ficonMS
Syntax
ficonMs
Purpose
This command show the Ficon MS settings
NOTE: This command is displayed on a
Sphereon 3016
only if the feature
key is installed.
Parameters This command has no parameters.
Command Example
Root> show ficonms
FICON CUP
Zoning State The enabled state of the FICON CUP
Zoning feature
Host Control List List of 0-8 control hosts, displays
“empty” for control host list with no
members.