McDATA Enterprise Operating System, User Manual

Page: 50 / 328

2
2-6
Enterprise Operating System Command Line Interface User Manual
config
Command Example
Root> config enterpriseFabMode setState 1
NOTE: You cannot activate Enterprise Fabric Mode while Open Trunking is
enabled.
config.features.enterpriseFabMode
Syntax
enterpriseFabMode enterpriseFabModeState
Purpose
This command sets the Enterprise Fabric Mode state for the fabric.
The SANtegrity™ feature key must be installed to activate the
Enterprise Fabric Mode state.
Parameters This command has one parameter.
Command Example
Root> config features enterpriseFabMode 1
NOTE: The command config.enterpriseFabMode.setState on page 2-5 has
functionality that is identical to this command.
config.features.ficonMS
Syntax
ficonMS ficonMSState
Purpose This command sets the enabled state of the FICON Management
Server. The FICON Management Server feature key must be installed
in order to enable the FICON Management Server State. (The
Sphereon 4300 and Sphereon 4500 switches do not accept this
command.)
NOTE: This command is displayed on a
Sphereon 3016 and 3216
only if
the feature key is installed.
enterpriseFabModeState Specifies whether enterpriseFabMode is
active. Valid values are
activate and
deactivate . Boolean 1 and 0 may be
substituted as values.