McDATA Enterprise Operating System, User Manual

Page: 265 / 328

A
Error Messages
A-25
Message Error 165: CUP Zoning feature key must be installed
Description
The command is not available without the FICON CUP Zoning
feature key.
Action Install the FICON CUP zoning feature key.
Message Error 166: CUP Zoning feature must be enabled
Description The command cannot be completed with the CUP Zoning feature
enabled.
Action Enable FICON CUP Zoning.
Message Error 167: Diagnostics can not be run on inactive port
Description The port is in the inactive state and diagnostics cannot be run.
Action The port state must change out of the inactive state.
Message Error 168: Duplicate member in the list
Description The member is already in the list.
Action Duplicate members are not allowed in the list.
Message
Error 169: Cannot enable CNT feature
Description CNT support is in the wrong state.
Action The enabled state for CNT support must be changed.
Message Error 170: Duplicate IP Address range in the switch IP Access
Control List
Description
Duplicate IP address pairs are not allowed in the Access Control List.
Action This command is redundant, the member already exists in the list.