McDATA Enterprise Operating System, User Manual

Page: 192 / 328

2
2-148
Enterprise Operating System Command Line Interface User Manual
show
show.fabric.nodes
Syntax
nodes
Purpose This command displays a list of all fabric-attached nodes.
Parameters
This command has no parameters.
Command Example
Root> show fabric nodes
Output The data is displayed as a table that includes the following
properties.
Output Example The output from the show.fabric.nodes command displays as follows.
Domain ID Node WWN
--------- -----------------------
2 12:34:7C:CC:57:86:37:23
2 98:45:75:25:7B:35:30:34
2 27:35:3E:69:63:34:22:11
2 29:81:24:74:57:32:48:98
6 25:F2:35:7A:25:22:11:0B
18 F1:23:96:43:56:A3:AA:12
18 45:4D:2B:22:62:9B:19:91
show.fabric.principal
Syntax
principal
Purpose This command displays the WWN of the principal switch in the
fabric.
Parameters This command has no parameters.
Command Example
Root> show fabric principal
Output The data is displayed as a table that includes the following
properties:
Domain ID Domain ID of the switch to which the device is
attached.
Node WWN The WWN of the fabric attached node.
Principal Switch
WWN The WWN of the principal switch in the
fabric.