McDATA Enterprise Operating System, User Manual

Page: 72 / 328

2
2-28
Enterprise Operating System Command Line Interface User Manual
config
Command Example
Root> config port show 4
Output This command displays as a table that includes the following
properties.
Output Example
The output from the config.port.show command displays as follows.
Port Number: 4
Name: Sam’s tape drive
Blocked: false
Type: F Port
Speed: 2 Gb/sec
Rx BB Credits: 12
config.port.showPortAddr
Syntax
showPortAddr
Purpose This command displays the port address configuration for all ports.
NOTE: The command show.port.showPortAddr on page 2-173 has functionality
that is the same as this command.
Port Number The port number.
Name The configured port name.
Blocked The blocked state. Valid values are true and false .
FAN The fabric address notification (FAN) state. Valid
values are
true and false . (Sphereon 4300 and
Sphereon 4500 switches only.)
Type The port type. Valid values are:
• F Port
• E Port
• G Port
• Fx Port (Sphereon 4300 and Sphereon 4500 only)
• Gx Port (Sphereon 4300 and Sphereon 4500 only)
Speed The port speed. Valid values are 1 Gb/sec , 2 Gb/sec ,
and Negotiate .
Rx BB Credits The number of configured Rx BB Credits.