McDATA Enterprise Operating System, User Manual

Page: 289 / 328

A
Error Messages
A-49
Message Error 304: Radius Authentication Present. Cannot remove all
Radius Servers
Description You cannot remove all the RADIUS Server configurations if RADIUS
Authentication is enabled on any interface.
Action Disabled RADIUS Authentication on all interfaces and then remove
the last RADIUS server configuration.
Message Error 305: Operating mode is not OSMS
Description You cannot enable CT Outgoing Authentication when Open Systems
Management Server is disabled.
Action Enabled Open Systems Management Server before enabling CT
Outgoing Authentication.
Message Error 306: CT Outgoing Authentication is enabled
Description You cannot disable Open Systems Management Server when CT
Outgoing Authentication is enabled.
Action Disabled CT Outgoing Authentication before disabling Open
Systems Management Server.
Message Error 307: The preferred path does not exist
Description You tried to clear a path that does not exist.
Action
None
Message Error 308: Invalid line speed combination
Description The ethernet speed/duplex combination is invalid.
Action Enter a valid ethernet speed/duplex combination.