McDATA Enterprise Operating System, User Manual

Page: 230 / 328

2
2-186
Enterprise Operating System Command Line Interface User Manual
show
Output Example The output from the show.snmp command displays as follows.
SNMP Agent State: Enabled
FA MIB Version Number: 3.0
Authentication Traps: Enabled
Index Community Name WriteAuth Trap Recipient UDP Port
----- ----------------------------- --------- --------------- ------
1 CommunityName1 Enabled 123.123.123.123 162
2 CommunityName2 Enabled 10.25.25.10 144
3 CommunityName3 Disabled 132.44.85.224 162
4 public Enabled 162
5
show.switch
Syntax
switch
Purpose This command displays switch attributes.
Parameters This command has no parameters.
Command Example
Root> show switch
Output The switch attributes data is displayed as a table that includes the
following properties.
State The state of the switch (for example, online or
offline).
BB Credit The BB_Credit. (This does not apply to the
Sphereon 4300 and Sphereon 4500 switches.)
R_A_TOV The R_A_TOV as set in the config.switch.raTOV
command. For more information, see
config.switch.raTOV on page 2-76.
E_D_TOV The E_D_TOV as set in the
config.switch.edTOV command. For more
information, see
config.switch.edTOV on
page 2-73.
Preferred
Domain Id The domain ID as set in the
config.switch.prefDomainId command. For
more information, see
config.switch.prefDomainId
on page 2-75.