Maeda MK0003, Service Manual, Page: 305 / 348

5-11
Display Name Content
Mode key
When parameter is displayed; moves to the following parameter
group.
When data is displayed; cancels the setting and returns to
the parameter display.
When in individual input mode; moves the blinking line to the left
when not at the furthest left digit.
Moves to the furthest right digit if at
the furthest left digit.
Displays the data of the output frequency monitor (d001),
regardless of the display screen, when long-pressed for more than
three seconds.
Enter key
When parameter is displayed; moves to data display.
When data is displayed;
saves the setting after confirming
them (saves to EEPROM) and
returns to the parameter display.
When in individual input mode; confirms the blinking line, and
moves the blinking line to the right.
Increment key Adds parameter or setting data. Accelerates if long-pressed.
Enters the "individual input mode” where each line can be edited
individually, when the increment and decrement key is pressed
simultaneously.
Decrement key Decreases parameter or setting data. Accelerates if long-pressed.
Enters the “individual input mode” where each line can be edited
individually, when the increment and decrement key is pressed
simultaneously.
USB connector Connector to connect with computers (mini-B type).
Use when connecting with the support tool “CX-Drive” for the
inverter/servo.
RJ45 connector Connector (RS-422) for the optional remote operator connection.
The keys on the main unit will be disabled when the remote
operator is connected. The items to display in the display part at
this stage can be configured in b150.