Maeda MK0003, Service Manual, Page: 187 / 348

2-159
(1-7) Winch setting screen selector button
Use this button to change the display to the screen with which to set
the winch condition (fixed or single fall hook).
Refer to “ [4] Monitor 4: Hook selector screen ” for setting contents.
(1-8) Service screen selector button
Use this switch to display the service content.
When “Service screen selector button” is pressed, the screen
changes to the service screen of the monitor 5.
(1-9) Crane mode button
Use this button to change to the crane mode.
Set up the outrigger securely by referring to “Operation 2.12 Setting
Up the Outrigger”. Then, press the “crane mode” button. After the
circle on the left turns from red to green and the mode changes to
crane, the crane comes ready for operation.