Maeda MK0003, Service Manual, Page: 253 / 348

3-17
(1.1) Setting of machine state
J (Fixed hook): Yes/No
J1 (1 fall hook): Yes/No
WINCH (Installation of winch): Yes/No
Select applicable items with respect to the machine state and equipment
at the time of calibration.
(A green circle denotes selection while a blue circle denotes no selection.)
NOTES
Calibration for fixed hook can only be done in “Middle position”.
Before calibrating, make sure actual position of fixed hook is also in
“Middle position”.
•
When having calibrated Length, be sure to calibrate Load.
•
When having calibrated Angle, be sure to calibrate Load.
(1.1.1) Calibration of length
Select “LENGTH” and calibrate the boom and jib length display.
Refer to (1.1.1.1) Calibration of boom length when you wish to calibrate
boom length, and to (1.1.1.2) Calibration of jib length when you wish to
calibrate jib length.
(1.1.1.1) Calibration of boom length
Calibrate the boom length.
Select “BOOM LENGTH”.