Lucent Technologies SLC-2000 Access System Central Office Terminal, Assembly Manual

Page: 92 / 284

3-26 Issue 5 May 1997
363-208-010
Cabling, Wiring, and Assembly
PCM Connections
Connecting Procedure for Cable
Assemblies ED7C723-30 Groups 9() to 12()
NOTE
:
This procedure consists of mating the ARM Shelf PCM Dangler Cable
Assemblies (ED7C723-30 Groups 9() to 12(), Figure 3-15) to each MDS
Shelf Dangler Cable Assembly [ED7C723-32 Group 11()] which has been
furnished as part of the MDS assembly.
NOTE
:
Verify that unassigned connectors (for unfurnished MDS assemblies) have
their protective caps installed.
Connections
Step 1:
Mate the ARM Shelf PCM dangler Cable Assembly connector J500 () in
the right duct with its MDS shelf P500 counterpart in accordance with
the following assignment:
Step 2: Position the cables in the right side duct in accordance with Figure 3-16.
ARM Shelf Connector MDS
J500-1 1
J500-2 2
J500-3 3
J500-4 4