Lucent Technologies SLC-2000 Access System Central Office Terminal, Assembly Manual

Page: 25 / 284

SLC
®
-2000 Access System
RT Frame Assembly Manual
Issue 5 May 1997 1-1
Lucent Technologies
363-208-010
1
General Information
General Information
Installation Activity and Test Sequence
Installation and test operations for SLC
®
-2000 Remote Terminal (RT) Frames are
outlined in this text as sequential procedures. For ease of operation, it is
recommended that the format and sequence listed herein be followed. Common
mechanical-type instructions and information are outlined in Chapter 2,
Installation Procedures.
The installation sequence for a SLC-2000 route may begin either at the central
office, remote locations, or simultaneously at any combination of offices,
depending upon the availability and deployment of personnel. The installation
operation is considered complete when all bays are interconnected with the cable
or fiber line facilities, and with the power, ringing and alarm systems.
Remote Terminal
Installation consists of the assembly, functional wiring, peripheral cabling, and
peripheral powering of the 7-foot
SLC-2000 RT bays. Also included are the
peripheral equipment, such as the ringing supplies and their associated
interconnections.
Wiring Operations
Preparation of the cable assemblies (VF, T1 lines, and alarms) involves wiring the
customer’s cables to the furnished connectors, which mate with the
SLC-2000
Access System equipment shelf connectors. This cable preparation may be
performed independently of other installation activity. If this work is done in
advance or simultaneously with the site preparation activity, the overall
installation interval may be reduced.