Lucent Technologies SLC-2000 Access System Central Office Terminal, Assembly Manual

Page: 18 / 284

xvi Issue 5 May 1997
363-208-010
About This Manual
Reason for Reissue
This manual covers activities relating to installation of the RT Frame and
equipment associated with the SD7C174-01
SLC-2000 Remote Terminal
Application Schematic drawing. The contents of this manual is based on
information from the Application Schematic issue which is included herein:
SD7C174-01 Issue 4
SLC-2000 Remote Terminal Application Schematic
This manual has been reissued (Issue 3) to include the equipment shown in issue
4 of the SD7C174-01
SLC-2000 Remote Terminal Application Schematic drawing.
This manual has been reissued (Issue 4) to correct typographical errors and to
add AT&T Practice 065-215-250 after the Supplementary Information tab.
This manual has been reissued (Issue 5) to correct the information about the DS1
connection of the Metallic Distribution Shelf to DSX-1 panel in Chapter 3. The
addition of the ED7C723-35, Groups 17 through 22, Cable Assemblies allows for
the cabling between the DSX-1 panels and the MDS and HDOS and the use of
MSDT/FiberReach servers throughout the MDS. It is also being reissued to
correct typographical errors, to add the new cable assemblies, and to change from
an AT&T to a Lucent Technologies manual.
How to Use This Manual
This manual is organized as follows:
■
About This Manual
This chapter defines the purpose, scope, and intended audience for
this document, provides introductory and support information on this
document, includes the bibliography (references), lists training courses,
and tells how to obtain technical support on the system.
■
Chapter 1, General Information
This chapter contains descriptions of the frame structure, channel shelf
modularity, and growth patterns. Also included are general circuit pack
handling precautions and specific warnings relating to lightwave safety
and ESD considerations.
■
Chapter 2, Installation Procedures
This chapter includes instructions for field assembly of frames and
shelves including details and precautions for handling, inspection,
placement, and mounting the equipment.
■
Chapter 3, Cabling, Wiring, and Assembly
This chapter contains information for installing cable assemblies and
related equipment including the inter-shelf (factory preassembled) and
external wiring (field fabricated) connections to ancillary equipment.
■
Chapter 4, Parts Lists and Kits
This chapter lists the assemblies, kits, parts, and tools required for the
initial installation or subsequent growth. Also included are tools and
replacement parts for field repairs.