4-2
Issue 5
May 1997
363-208-010
Parts Lists and Kits
Basic SLC-2000 Hardware
Factory Assembled RT Bays
■
J1C265A-1 7-foot Remote Terminal Bay
Frame Mounting Material (1 per RT Frame)
Frame mounting material consists of the basic bay framework, anchoring material,
and miscellaneous hardware to enclose and protect the equipment and cabling
within the bay. The following listings can be used as an ordering guide or as an
installation checklist for material previously ordered. The material that is indicated
as optional is used to enhance the general appearance of the bay or is relevant to
its particular environment.
Refer to the SUPPLEMENTARY INFORMATION chapter of this manual for
detailed information.
ARM Shelf (1 per RT Frame)
■
J1C265AA-1 List 1 ARM Assembly
MDS Assembly (as required)
■
J1C265AB-1 List 1 MDS Assembly (0 minimum, 4 maximum)
Optic Fiber Jumper Cables
Bulk Power and Ringing Cables
DS1 Cross Connect Blocks - optional
Tools
Test Equipment
Ancillary Equipment - Customer Furnished
Summary of Contents for SLC-2000 Access System Central Office Terminal
