SLC
®
-2000 Access System
RT Frame Assembly Manual
Issue 5
May 1997
xv
Lucent Technologies
363-208-010
About This Manual
Purpose
This manual provides installation instructions for the
SLC
®
-2000 Access System
RT Frame for end users responsible for their own equipment assembly, mounting,
assembly, and connections of the RT System. It can also be used as a
troubleshooting guide for installation wiring problems. Refer to Lucent
Technologies 363-208-001
SLC-2000 Access System User/Service Manual for
any activity involving system turn-up, circuit turn-up, maintenance, or trouble
analysis.
Scope
This document is intended to enable installation personnel to install the RT Frame
equipment without the use or reference to any documents other than job
drawings and specifications. Only the
SLC-2000 RT Frame Assembly installation
instructions are covered herein. Refer to other appropriate Lucent Technologies
Practices for installation instructions of RT cabinets.
Intended Audiences
This installation manual is for
SLC-2000 Access System customers who maintain
their own installation organization to install equipment.
This manual is intended ONLY for the installation of the 7-foot RT Frame in
remote terminal hut, customer premises, or CEV environments; and for
preliminary tests performed prior to turnover tests by remote terminal testing
personnel.
Summary of Contents for SLC-2000 Access System Central Office Terminal
