Lucent Technologies SLC-2000 Access System Central Office Terminal, Assembly Manual

Page: 225 / 284

363-208-010
Applications
Issue 5 May 1997
A-9
DSX-1 Interconnections
The SLC-2000 System supports either DS1 Distribution or DS1 Feeders, but not
both simultaneously from the ARM shelf. The same cables may be used to
connect to the DSX-1 but they must be connected at the ARM shelf to the
appropriate connectors for their intended application as follows:
The MSDT Server (SPQ
®
808 or SPQ809) or DT Server (SPQ810), plugged into
the MDS, can operate over standard T1 facilities by using the ED7C723-35, Group
17 Cable Assemblies and the ED7C723-35, Groups 19 through 22, Cable
Assemblies as inputs/outputs from the MDS to the DSX-1 or T1 facility.
The ED7C723-35, Group 18, Cable Assemblies may be used to connect a
miscellaneously mounted HDOS to a DSX-1 panel.
DS1 Feeders
The
SLC-2000 System provides a DS1 metallic feeder capability as a start-up
system without using the SONET feeder circuit packs except for the controllers.
This system, which is not compatible with other network elements in a SONET
network, utilizes quad LIUs interfacing with the DSX-1 for cross-connection to an
external multiplexer or external protection and repeater shelves for T1 feeder
applications.
J160 DS1 Feeder Input 1-16
J161 DS1 Feeder Input 17-28
J162 DS1 Feeder Output 1-16
J163 DS1 Feeder Output 17-28
J165 DS1 Distribution Output 17-28
J166 DS1 Distribution Output 1-16
J167 DS1 Distribution Input 17-28
J168 DS1 Distribution Input 1-16
J101 DS1 Distribution Input/Output
J102 DS1 Distribution Input/Output
J103 DS1 Distribution Input/Output
J104 DS1 Distribution Input/Output
J201 DS1 Distribution Input/Output
J202 DS1 Distribution Input/Output
J203 DS1 Distribution Input/Output
J204 DS1 Distribution Input/Output