Lucent Technologies SLC-2000 Access System Central Office Terminal, Assembly Manual

Page: 217 / 284

SLC
®
-2000 Access System
RT Frame Assembly Manual
Issue 5 May 1997 A-1
Lucent Technologies
363-208-010
A
Applications
Introduction
This section of the manual contains Application Figures and the standard
Application Schematic drawing. These drawings facilitate the installation process
and are a means of tracing and troubleshooting installation wiring and
interconnect problems. They offer the installer both a comprehensive overview
and detailed requirements relating to all interconnections in the
SLC
®
-2000 RT
Frame System.
Application Figures
These general figures are meant to guide the installer in the installation of the
Customer Interconnect Cable Assemblies and the cross-connections to the
ancillary, auxiliary, and/or external equipment. Separate cross-connect blocks are
indicated for each type of alarm and test application (Miscellaneous, Discrete, RT,
DC Test Pair, etc.) but may be economically combined at the customer’s
discretion. The figures show specific equipment (cable assemblies, cross-
connect blocks, ringing supplies, etc.) but are meant to be typical examples.
Other vendor products may be substituted but they must meet the requirements
outlined by the Application Schematic, SD7C174-01.
Figure A-1: RT Bay Metallic and FTTL Distribution Peripheral Interconnections
Figure A-2: RT Bay FITL Application Peripheral Interconnections
Figure A-3: MDS Assembly VF Cabling Channels 1-96
Figure A-4: DSX-1 Interconnections
Figure A-5: Optical Fiber Interconnect
Figure A-6: Miscellaneous Discrete Alarms
Figure A-7: RT Input Alarms