Lucent Technologies SLC-2000 Access System Central Office Terminal, Assembly Manual

Page: 279 / 284

363-208-010, Appendix 3
Test Head Installation
Issue 1 November 1998
A3-9
SLC-2000 Access System Circuit Packs
General
These procedures verify that the software and the circuit packs in the SLC-2000
Access System shelves that are required for the operation of the Lucent
Technologies RTH-7000 or General Signal Networks Tau-tron
ngRTH test head
are present. See Table 1-3 for the circuit packs that must be present in the
SLC-
2000 Access System for the operation of the test head.
Table 1-3.
SLC-2000 Access System Circuit Packs
Circuit Pack Verification
Step 1: Verify that the SMU, LAN, and PDC are in the ARM shelf.
Step 2: Verify that the MDC, T8U, and PTU are in the MDS shelf(ves) of the
subscriber circuits or drops to be tested.
NOTE
:
The T8U is required for TR-08 operation only.
Step 3: Verify that the DLC software is as follows:
RT: R 3.02.01 or R 4.05.00 (or later)
Pack Location Description
SMU ARM Shelf System Memory Unit
LAN ARM Shelf Link to Alarms and Networks
PDC ARM Shelf Provisioning and Display Controller
MDC MDS Metallic Distribution Controller
T8U * MDS TR-08 Unit
PTU MDS Power and Test Unit
* The T8U is required for TR-08 operation only.