manualshive.com logo in svg

Krone Comprima F 125, Original Operating Instructions, Page: 84 / 430

Share
Download
Krone Comprima F 125 Original Operating Instructions Download Page 84

Commissioning

 

 

84 

 

Pos: 40.39.10 /BA/Ersti nbetri ebnahme/R undball enpresse/Gelenkwelle/Gel enkwell e an di e M aschine montieren_Bil d2_C ompri ma @ 514 \mod_1504182229900_78.docx @ 3535827 @  @ 1 

 

1

3

COM00619

7

6

4

5

 

Fig. 54 

Pos: 40.39.11 /BA/Ersti nbetri ebnahme/R undball enpresse/Gelenkwelle/Gel enkwell e an d er M aschi ne monti eren_Text2_C ompri ma @ 514\mod_1504182912642_78.docx @ 3535921 @  @ 1 

 

•  For easy access to the screw connection (2) at the universal shaft (1), remove the screw 

connection (7) and the cover (6) at the protective cap (3). 

•  Push the universal shaft (1) onto the PTO shaft end of the machine. 
•  Mount the screw connection (2) through the resulting hole behind the cover (6). 
•  Attach the cover (6). 
•  Hook the universal shaft chain (5) into the eye (4) at the protective cap (3). 
 

 

For more details or in case of different universal shafts, refer to the operating instructions for 

the universal shaft comprised in the delivery. 

 

 

Pos: 40.40 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for Comprima F 125















































































































































































































































































































































































































































Reviews:

No comments