manualshive.com logo in svg

Krone Comprima F 125, Original Operating Instructions, Page: 250 / 430

Share
Download
Krone Comprima F 125 Original Operating Instructions Download Page 250

Maintenance

 

 

250 

 

Pos: 52.141.1 /Ü berschriften/Ü berschriften 2/U-Z/WWartung-Bremsanl age @ 34\mod_1255593197094_78.docx @ 324322 @ 2 @ 1 

 

13.24 

Maintenance 

– brake system (special equipment) 

Pos: 52.141.2 /BA/Sicher hei t/2. Vor ang estellte War nhi nweise/WARNUNG - Nichtbeachtung der grundlegenden Sicher heitshi nweise alte F orm @ 254\mod_1397485793575_78.docx @ 1953347 @  @ 1 

 

 

WARNING! 
If the basic safety instructions are not followed, people may be seriously injured or 
killed.  

•  To avoid accidents, the basic safety instructions in the chapter Safety must have been 

read and followed, see chapter Safety "Basic safety instructions". 

 

Pos: 52.141.3 /BA/Sicher hei t/2. Vor ang estellte War nhi nweise/WARNUNG - Nichtbeachtung der Sicher heitsroutinen alte F orm @ 273\mod_1404117435996_78.docx @ 2058712 @  @ 1 

 

 

WARNING! 
If the safety routines are not adhered to, people may be seriously injured or killed.  

•  To avoid accidents, the safety routines in the chapter Safety must be read and followed, 

see chapter Safety "Safety routines". 

 

Pos: 52.141.4 /BA/Sicher hei t/Br emsen/WARNUN G - Br emsanl age @ 273\mod_1403676268419_78.docx @ 2053696 @  @ 1 

 

 

WARNING! 
Risk of injury resulting from damage to the brake system 

Damage to the brake system may impair the operational safety of the machine and cause 

accidents. As a result, people may be seriously injured or killed. 
•  Adjustment and repair work on the brake system must only be performed by authorised 

professional workshops or recognised brake services. 

•  Have the brakes checked regularly by a specialist workshop. 
•  Have damaged or worn brake hoses replaced immediately by a specialist workshop. 
•  Irregularities or malfunctions in the brake system must be rectified immediately by a 

specialist workshop. 

•  Only a machine with an intact brake system may be used for work in the field or for 

travelling on roads. 

•  No changes may be made to the brake system without the approval of KRONE. 
•  KRONE is not responsible for natural wear, defects caused by overload or changes made 

to the brake system. 

 

Pos: 52.141.5 /Layout M odul e /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for Comprima F 125















































































































































































































































































































































































































































Reviews:

No comments