manualshive.com logo in svg

Krone Comprima F 125, Original Operating Instructions, Page: 290 / 430

Share
Download
Krone Comprima F 125 Original Operating Instructions Download Page 290

1

Connecting the terminal

1.3

Connecting the KRONE ISOBUS terminal (CCI 1200)

8

RP701-10 , RP701-11 , RP701-20 , RP701-21 , RP701-30 , RP701-31 , RP701-40 , RP701-41 , RP701-51

Comfort 1.0_en

Tractors with integrated ISOBUS system

EQ001-173

ü

The machine is shut down and safeguarded, Shutting down and safeguarding the machine.

Connection terminal to tractor

„

Connect the 12-pin plug (2) of the cable (3) to the 12-pin socket (1) of the terminal.

„

Connect the 9-pin plug (4) of the cable (3) to the 9-pin socket (5) (In-cab).

Connection tractor to machine

INFORMATION

The cable (8) can be ordered by quoting the order number 20 086 886 *.

„

Connect the 9-pin plug (7) of the cable (8) to the 9-pin ISOBUS socket (6) of the tractor.

„

Connect the 11-pin plug (9) of the cable (8) to the 11-pin socket (10) of the machine.

Summary of Contents for Comprima F 125















































































































































































































































































































































































































































Reviews:

No comments