7
Terminal menus
7.25
Menu 15 "Settings"
66
RP701-10 , RP701-11 , RP701-20 , RP701-21 , RP701-30 , RP701-31 , RP701-40 , RP701-41 , RP701-51
Comfort 1.0_en
Dimension X
Dimension Y
Net wrapping
410 mm
365 mm
Chamber film wrapping
400 mm
370–375 mm
Press the key
or
until the tying actuator retracts far enough and the dimensions
X and Y from the table above are achieved.
Press
.
Æ
The set position is saved.
Setting the tying position
RP000-045
The tying position must not be set separately as it results from the cutting position and the feed
position. The tying position has been set optimally when the rope (3) is not tensioned and the
roll (1) is positioned in front of the ratchet mechanism.
If the rope (3) is tensioned and the roll (1) is not positioned in front of the ratchet mechanism (2),
check and reset the cutting position and the feed position.