Krone Comprima F 125 Original Operating Instructions Download Page 292

Page: 292 / 430

Connecting the terminal

1.4

Connecting foreign ISOBUS terminal

RP701-10 , RP701-11 , RP701-20 , RP701-21 , RP701-30 , RP701-31 , RP701-40 , RP701-41 , RP701-51

Comfort 1.0_en

INFORMATION

To mount the terminal in the tractor cabin, observe the provided operating instructions of
terminal.

EQ001-146

The machine is shut down and safeguarded, Shutting down and safeguarding the machine.

Connection tractor to machine

Connect the 9-pole plug (5) of the cable (2) to the 9-pole ISOBUS socket (1) of the tractor.

Connect the 11-pole socket (4) of the cable (2) to the 11-pole socket (3) of the machine.

Connection terminal to tractor

INFORMATION

For further details on terminal connection, observe operating instructions of ISOBUS terminal
manufacturer.

Summary of Contents for Comprima F 125















































































































































































































































































































































































































































Search results

Summary of Contents for Comprima F 125

Reviews:

Krone Comprima F 125, Original Operating Instructions, Page: 292 / 430

Search results

Summary of Contents for Comprima F 125

Reviews: