Konica Minolta REGIUS 190, Service Manual

Page: 99 / 220

72
2.5 Subscan Unit
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
•
Remarks for installation
• When reinstalling the sensor assy into the unit, while
pressing the detect roller of the V-sync sensor by fi nger as
shown in the right fi gure, slide the assy up. If the slide
roller is in upright position, it interferes with the activator
receptor plate, and cannot be slid in.
• When sliding the sensor assy up, align the assy to the left
end as close as possible.
• After con fi rming that the top edge of the sensor assy fi ts
into the sensor holder (leaf spring) of the main unit, tighten
the
fi xing screw.
Detect Roller of V-sync Sensor
Sensor Assy Holder
Sensor Assy
Fixing Screw