Konica Minolta REGIUS 190, Service Manual

Page: 189 / 220

162
4.4 Error Code
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
04906
Cassette warp
detected The Peel sensor turned on during
execution of either read
opreations or erasure operations. 1) Open the front cover and remove any
cassettes, and then close the door
and restore.
2) Halt usage of the problematic cas-
sette and return it to the plant for
repair.
3) If the error occurs with different cas-
settes, adjust the peel detection
roller. (
p.117 )
04907
Cassette peel off NG The Absorption Detect sensor
turned on after peeling of the cas-
sette from the absorption plate
following joining of the front and
back plates. 1) Remove any cassettes, and then
close the door and restore.
2) If the problem reoccurs for the same
cassette, halt usage of this cassette
and return it to the plant for repair.
04908
Cassette fall off
detected It was detected that joining of the
front and back plates was not
confirmed at cassette ejection. 1) Remove any cassettes, and then
close the door and restore.
2) Check the operation of the device
and examine the cassettes.
Error
code Error name Error description Action