Konica Minolta REGIUS 190, Service Manual

Page: 208 / 220

181
A.1 SCB2 Dummy Program Screens
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
•
[Others] Tab
Key Description
Bar code [Start Read] Sends a command to the bar code reader to start reading. After reading,
the bar code information will be displayed on the "Command Execution
Information Column".
[Stop Read] Sends a command to the bar code reader to stop reading.
LCD [Test screen] Displays the test window on the LCD. At the same time, the backlight is
turned ON.
Speaker [Sound 1] Output "Sound 1(pin pone)" from the speaker. This sound is used to notify
an error.
[Sound 2] Output "Sound 1(pipi! pipi! .... continued)" from the speaker. This sound is
used to notify a cassette is being ejected.
[Sound 3] Output "Sound 1(pi!)" from the speaker. This sound is used to notify it is
ready to accept a new cassette.
[Sound 4] Output "Sound 1(pipipi!)" from the speaker. This sound is used to notify that
it failed to read the bar code or the cassette is not aligned to the left edge,
and to prompt the user to check the operation.
[Stop] Stops the sound being output from the speaker.