Konica Minolta REGIUS 190, Service Manual

Page: 192 / 220

165
4.4 Error Code
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
14010
Signal process error QRV Over fl ow The sensitivity has been mistakenly
corrected. Check the following.
1) Con fi rm that the ADB2's high volt-
age On/Off switch is On (check by
reading the solid density).
2) Con fi rm the absence of problems
in the exposure X-ray.
3) Replace the plate and con fi rm
operation.
4) Check the connectors in the vicin-
ity of the PMT and ADB2.
14011 Signal process error QRV Under fl ow The sensitivity has been mistakenly
corrected. Check the following.
1) Con fi rm that the ADB2's high volt-
age On/Off switch is On (check by
reading the solid density).
2) Con fi rm the absence of problems
in the exposure X-ray.
3) Replace the plate and con fi rm
operation.
4) Check the connectors in the vicin-
ity of the PMT and ADB2.
Code Medium Classifi-
cation Detailed Clas-
sification Countermeasures, etc.