Konica Minolta REGIUS 190, Service Manual

Page: 90 / 220

63
2.4 Transport Unit
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
2.4.8 Replacement of Receiver Sensor
1.
Remove the receiver assy. ( "2.4.2 Removal of the Cassette
Receive Unit, p.54" )
2.
Cut the tie band of the receiver motor bracket.
3.
Remove the two fi xing screws, and remove the receiver
sensor bracket.
4.
Unplug the connector from the receiver.
• JP21
5.
Remove the receiver sensor (S2) from the receiver sensor
bracket.
6.
Carry out reassembly in the reverse order to that described
above.
•
Remarks for installation
When attaching the tie band to the wires on the receiver sensor
bracket, fi t it into the groove with its end shown in the right.
Tie Band
Fixing Screws
Receiver Sensor (S2)
Receiver Sensor Blacket
Groove
Tie Band