Konica Minolta REGIUS 190, Service Manual

Page: 200 / 220

173
A.1 SCB2 Dummy Program Screens
REGIUS MODEL 190 Service Manual Ver.1.00 2004.11.01
A.1.4 "SCB2 Properties" Dialogue
This dialogue will appear when "SCB2 Set Up" is selected in
"Set Up" menu of the main window. (" A.1.1 Main Window,
p.169" )
Do not change the setting unless otherwise instructed.
Item Description
Registration mode Speci fi es "Barcode Reg." or "Manual reg.". This setting will be sent as a parameter
of "Ready OK" command after initialization is completed.
No registration Checking this item will send "Registration NG" against "Barcode Detect" sent from
the MCB2.
Subscanning Speci fi es "High res" or "Standard". This setting will be sent as a parameter of
"GoForward".
Subscanning time Speci fi es the waiting time between the receipt of "Laser ON" status from the
MCB2 and sending "GoBackward" .
Reference erase value Speci fi es the reference value for erasure. This setting will be sent as a parameter
of "GoBackward", and the MCB2 will set the erase time according to this value.
Registration search time Speci fi es the waiting time between the receipt of "Barcode Detect" status from the
MCB2 and sending "Registration OK" or "Registration NG".
Ready delay time Speci fi es the waiting time between the receipt of "Ready" status from the MCB2
and sending "Ready OK".
Shut Down time Speci fi es the waiting time between the receipt of "Power OFF" status from the
MCB2 and sending "Power OFF OK".
Power OFF NG Speci fi es the waiting time between the receipt of "Power OFF" status from the
MCB2 and sending "Power OFF NG".
Communication log fi le Checking this item allows to save all communication result with the MCB2 in fi le.