Konica Minolta 0902, Service Manual

Page: 129 / 302

Chapter 5 Disassembly and Assembly
5-9
3
Install the circuit board cover.
•
3 screws (M3 x 6)
Installing the First Front Panel
4
Install the first front panel.
•
6 screws (M4 x 8)
Hold the bottom part of the first front panel with both
hands, and install it by inserting the top part of panel
into the panel.
5
Close the second front door.
Installing the First Front Back Panel
6
Install the first front panel.
•
7 screws (M4 x 8)
Hold the bottom part of the first front back panel with
both hands, and install it by inserting the top part of
panel into the panel.
Installing the First Front Back Panel
7
Install the first front back panel.
•
6 screws (M4 x 8)
•
1 spacer for each screw (for 4 locations excluding the
middle one)
Now, you have finished with the procedures to install the exterior panels and the insertion unit.
First Front Back Side
First Front Side
First Front Back Side
Second Front Back Side