Konica Minolta 0902, Service Manual

Page: 295 / 302

8-9
8.2 Global Wiring Diagram
(Digital power supply
+5V and +24V)
Interlock relay 2
Digital power supply
cooling fan
Cooling fan
Shutter
motor
Eraser cooling fan Insertion sensor
(Left LED)
Insertion sensor
(Center LED) Insertion sensor
(Left PD) Insertion sensor
(Center PD)
Shutter open
detection S Sutter close
detection S Back board drop
detection S
Barcode reader
Indicator
Left side plate
Shutter mount plate Shutter assembly
Operation unit
Speaker
Standby power supply
Interlock relay 1
Interlock SW
(Analog power supply
+12V and +/- 5V)
Ethernet shielded cable
Ethernet
shielded cable
Ethernet
shielded cable
Lock motor Justifier S Justifier standard S Justifier HP-S Receiver S Receiver HP-S Lock HP
Transporter
read sensor Transporter
HP sensor Back plate
absorption
detection sensor
Receiver motor Justifier motor Transporter motor
(Halogen power supply)
Tap switch connector
Input voltage
Input voltage
Input voltage
Input voltage
Transformer
(Europe specification)
(General overseas)
Condenser
(UL specification)
(Japan specification)
Inlet
Breaker
Noise filter
Bottom plate Subscan base
Bottom plate Exterior frame_3
Ethernet shielded cable
Subscan base Optical base
Cable Bear
Overheat SW
Detach detection
sensor (Upper) Detach detection
sensor (Lower)
Inverter
Polygon driver
Holder
Encoder
Subscan HP-S
LM coil unit
Hot-cathode tube lamp
Halogen lamp
Approved by:
Designed by: Drawn by:
Checked by:
Scale
Part No.
Drawing No.
Name
Prepared
by:
Revision date No. of revision slip
Note 2: The weight percentage of lead in an alloy content shall be less than 0.35% in copper material, 0.4% in aluminum
material, and 4% in steel material.
Note 1: This board may not include RoHS hazardous materials (Chromium 6+, Lead, Mercury, Cadmium, PBB, and PBDE).
Larger than 500
and less than 1000
1000 or larger
50 or less
Larger than 50
and less than 500
Tolerance of wiring dimension (Finished dimension of diameter)
KONICA MINOLTA MEDICAL & GRAPHIC, INC.