Konica Minolta 0902, Service Manual

Page: 119 / 302

Chapter 4 Confirming Operation Using Service Tool
4-17
4.5 Confirming the Status of the Sensors
Confirmation procedure of the sensor status is described here.
1
Click the [Monitoring] tab in the [Unit Test] screen.
[Monitoring] panel is displayed.
2
Click the [Start] button.
Monitoring of the sensor status of the REGIUS MODEL
110 will start.
Most current sensor status will be displayed in the
"Sensor Status" every 3 seconds once the monitor is
started.
3
Confirm the status of the sensors.
4
Click the [Stop] once the confirmation is
completed.
Monitoring of the sensor status will finish.