Konica Minolta 0902, Service Manual

Page: 24 / 302

Chapter 2 Before the Repair
2-4
2.2 Structure
Following are the structure of the REGIUS MODEL 110.
No. Name Function
1 Insertion unit Constructed of slot to insert/eject the cassette, operation panel, barcode
reader, shutter open and close mechanism.
2 Exterior Unit to separate from outer environment, such as light shield, vibration
blocker, etc. Power supplies to supply power to control unit is located in
the first front side.
3 Framework Unit to construct the equipment's frame along with the exterior. Sensors
and motors relating to the transporter is installed. Also, control unit is
installed in the first front back side.
4 Transporter unit Move only the back plate (including the plate) of the cassette, locked in
the receiver unit, will be moved to reading position (first front back side).
5 Receiver unit Take in the cassette into the equipment with the receiver mechanism
and fix the cassette with the justifier mechanism. Also, cassette will be
locked or unlocked with the lock/lock release mechanism.
6 Subscan unit Subscan (horizontal movement) the optical unit/eraser unit.
Reading will be done during the movement from the second front back side
to the second front side, and erasing will be done during the returning.
7 Optical unit Read the image information on the plate by laser scanning unit and light
condensing unit.
8 Eraser unit Image information left on the plate will be erased with hybrid 2 step
erase method using halogen lamp and hot-cathode tube.
9 Detach detection unit Detect the warp or detachment of the plate in the back plate during read/erase.
4
3
5
7
8
9
1
2
6